flux-cored wire
英 [flʌks kɔːd ˈwaɪə(r)]
美 [flʌks kɔːrd ˈwaɪər]
药芯焊丝
双语例句
- Microstructure and properties of dissimilar metals TIG welding-brazing joint of aluminum alloy to stainless steel using Al-Si flux-cored wire
铝合金与不锈钢异种金属铝硅药芯焊丝TIG熔钎焊接头组织及性能 - In this paper, the oxidation behavior of deposited metal for new Ni-base flux-cored wire in air at the temperature of800 ℃ and1000 ℃ was studied by using the oxidation weight increasing method.
采用增重法测定了自制新型镍基药芯焊丝熔敷金属在800℃和1000℃空气中的高温氧化行为。 - Microstructure of hardfacing metal and matrix materials with high abrasive flux-cored wire
高耐磨药芯焊丝堆焊组织及基体选择 - The Method of CO2 Shielded Arc Welding with Stainless Flux-Cored Wire on the Internals of Column
不锈钢药芯焊丝CO2气体保护焊在塔内件焊接中的应用 - Large Area Surfacing Wear-resistant Composite Plate& Alloy Powder Surfacing with Self-shielded Flux-cored Wire Welding
大面积耐磨复合板堆焊&自保护药芯焊丝外添加合金粉工艺研究 - Flux-cored wire and electrode has lower toughness but good welding processing properties.
药芯焊丝和电焊条的焊接工艺性能稍好，但焊缝的韧性较低。 - Status Quo and Prospect of Application of Flux-cored Wire in Ship Welding in China
药芯焊丝在我国船舶建造中的应用现状与前景 - High-temperature Oxidation Behavior of Deposited Metal for New Ni-base Flux-cored Wire
新型镍基药芯焊丝熔敷金属的高温氧化行为 - The Development of Metal Cored Self-shielded Flux-cored Wire for Submerged Overlaying
金属粉芯自保护堆焊用药芯焊丝的研制 - Analysis of microstructures and properties on hardfacing metal of self-shielded flux-cored wire with high chromium cast iron type
高铬铸铁型自保护药芯焊丝堆焊组织与性能分析 - Studies on Preparation Process and Performance Optimization of Special Flux-Cored Wire with Wear Resistance
特种耐磨药芯焊丝的制备工艺和性能优化研究 - Study on self-shielded flux-cored wire with high baf_2 slag system
高BaF2渣系自保护药芯焊丝的研究 - Flux-cored wire is applied to the austenitic stainless steel pipe by back weld, MAG for the filling and cosmetic weld, at horizontal fixed round welding vertically up.
采用药芯焊丝对奥氏体不锈钢管道进行打底焊接，MAG焊填充及盖面焊，立向上的水平固定全位置焊接。 - The Effect of Welding Current on the Droplet Transfer of Rutile Flux-cored Wire
焊接电流对钛型药芯焊丝熔滴过渡特性的影响 - Basic flux-cored wire for backing weld to T91 tube was studied in this paper.
研究了用于T91钢管打底焊的碱性渣系药芯焊丝。 - This article anticipates the application of CO2 gas-shield flux-cored wire, electrode and submerged welding material.
讲述了CO2气体保护焊药芯焊丝、铁粉重力焊条、铁粉焊条和埋弧焊焊接材料在船舶高效焊接中的应用前景。 - Meanwhile the process and the measures with CO_2 gas shielded welding and Inconel series alloy flux-cored wire to weld the above mentioned material have been presented.
介绍了采用CO2气体保护焊和Inconel系合金药芯焊丝焊接上述异种材质的工艺方法和措施。 - At the special request of the flux-cored wire welding underwater, the welding arc control system is developed.
根据药芯焊丝水下焊接的要求，研制了一套水下焊接电弧控制系统。 - Study on mathematical model and control method of flux-cored wire mills
药芯焊丝连轧机的数学模型及其控制方法的研究 - For this reason the author decide to put forward a metal cored self-shielded flux-cored wire, in this way the author expect to ameliorate the problem of welding fume and increase the welding efficiency.
为此笔者提出了金属粉芯自保护药芯焊丝构想，以此改善自保护药芯焊丝烟尘较大的问题和提高焊接效率。 - The effect of the welding current on the droplet transfer of rutile flux-cored wire is studied by collecting droplets in a water trough.
采用水中收集熔滴的试验方法，选用3种国产焊丝，分别研究了其焊接电流对钛型药芯焊丝熔滴过渡特性的影响。 - Application on ceramic backing and flux-cored wire in welding thick-wall clad plate
陶瓷衬垫和药芯焊丝在焊接厚壁复合钢板中的应用 - Research progress of stainless steel flux-cored wire at home and abroad
国内外不锈钢药芯焊丝的研究进展 - Effects of Heat Treatment Parameters on Drawing Properties of Thin Diameter Stainless Steel Flux-cored Wire
热处理工艺参数对不锈钢药芯焊丝拉拔性能的影响 - In view of the situation, high chromium alloys were deposited by the methods of flux-cored wire submerged-arc welding and self-shielded open-arc welding.
为此，本文优化合金系统，调节堆焊工艺参数以改变其碳化物等组织形态，采用药芯焊丝埋弧焊或自保护明弧焊方式，制备了高铬堆焊合金。 - The experimental platform that tests the wear resistance of the flux-cored wire welding was established.
同时，建立了测试药芯焊丝堆焊层耐磨性的耐磨实验平台。 - The author took the heat flux distribution pattern above as basis, analyzed the welding thermal process of coarse flux-cored wire by numerical simulation technology and calculated dilution rates under different welding parameters.
本文以所建热流密度分布模式为基础，采用数值模拟技术分析了粗药芯焊丝堆焊热过程，获得了堆焊焊缝成型的技术数据，计算了不同焊接工艺参数下的稀释率。 - However, the current report about the metal powder flux-cored wire was concertrated on its process, the welding arc physical characteristic of research was rarely reported.
但是目前有关金属粉芯型药芯焊丝的研究报道主要在其工艺性方面，对其电弧物理特性的研究却少见报道。 - Metal powder flux-cored wire is widely used in bridge engineering, ship, aerospace, pipeline engineering.
金属粉芯型药芯焊丝已经广泛应用于桥梁、船舶、航空航天、管道等领域。